BPNPH - 402194, FRESH KOTE LATEX FLAT DEEP BASE
- MSDS: BPNPH
- Manufacturer: M A BRUDER AND SONS INC
- Product Name: 402194, FRESH KOTE LATEX FLAT DEEP BASE
- National Stock Number: 8010-00N033055
Product Identification
Product ID:402194, FRESH KOTE LATEX FLAT DEEP BASE
MSDS Date:01/11/1990
FSC:8010
NIIN:00N033055
MSDS Number: BPNPH
Responsible Party
BROOMALL, PA 19008
US
Emergency Phone: 215-353-5100;215-359-3635
Info Phone: 215-353-5100
Cage: 85519
Contractor
Telephone: 610-353-5100;610-359-3635
Cage: 85519
Ingredients
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: >3%
TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 1-10%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
15 MG/M3 TDUST; 5 MG/M3 RDUST
CAS: 1317-65-3
RTECS: EV9580000
Fraction By Weight: 11-30%
OSHA PEL SEE INGREDIENT NAME
ACGIH TLV: 10 MG/M3 TDUST
DIATOMACEOUS EARTH
CAS: 68855-54-9
Fraction By Weight: 1-10%
OSHA PEL 80 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
10 MG/M3 TDUST; 5 MG/M3
CAS: 1332-58-7
RTECS: GF1670500
Fraction By Weight: 1-10%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 2 MG/M3 TDUST; 9293
AL SILICATES
CAS: 1327-44-2
OSHA PEL 3 MG/M3
ACGIH TLV: 20 MPPCF
3.2%
CAS: 107-21-1
RTECS: KW2975000
Fraction By Weight: 1-10%
OSHA PEL 50 PPM STEL, C
ACGIH TLV: 50 PPM STEL, C
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
NONHAZARDOUS INGREDIENTS CONSISTING OF INGREDIENTS 8-10
STYRENE-ACRYLIC POLYMER
Fraction By Weight: >3%
VINYL ACRYLIC RESIN; (VINYL ACETATE/ACRYLIC POLYMER)
CAS: 25067-01-0
Fraction By Weight: >3%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: MAY CAUSE HEADACHE AND
NAUSEA. SKIN: POSSIBLE PRIMARY IRRITATION (MATERIAL IS SLIGHTLY
ALKALINE). EYE: PRIMARY IRRITATION. CHRONIC: NONE RECOGNIZED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL: REMOVE FROM EXPOSURE. SKIN: REMOVE MATERIAL WITH SOAP
AND WATER. REMOVE CONTAMINATED CLOTHING. EYES: FLUSH IMMED WITH
LARGE AMOUNTS OF WATER FOR AT LEAST 15 MIN. CONSULT PHYSICIAN FOR
SPECIAL M EDICAL TREATMENT. INGEST: CALL MD IMMED.
Fire Fighting
Flash Point:NON-FLAMMABLE
Lower Limits:SEE ING 6
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE (DUE TO
BUILD- UP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:COLLECT IN CONTAINER FOR DISPOSAL. CLEAN UP
WITH WATER BEFORE ALLOWING TO DRY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP FROM FREEZING. DO NOT STORE IN
SUN/ ABOVE 120F.
Other Precautions:DO NOT TAKE INTERNALLY. KEEP OUT OF REACH OF
CHILDREN.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPRVD MECH FILTER RESP TO REMOVE
SOLID AIRBORNE PARTICLES OF OVERSPRAY DURING SPRAY APPLICATION.
Ventilation:MAINTAIN ADEQUATE VENTILATION TO ENSURE AIR ENTRY DURING
APPLICATION AND DRYING.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:USE PROTECTIVE SKIN CREAM IF NEEDED.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Vapor Pres:SEE ING 6
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHYL ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:66-69
Stability
Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:IF INVOLVED IN FIRE (FROM OTHER
SOURCES) COULD CONCEIVABLY RSLT IN REL OF CO2 AND CO.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.